Settings
22
Changing and saving settings
Your steam oven is supplied with a
number of standard default settings.
The standard settings listed in the chart
below can be altered.
With the steam oven switched off:
Touch and hold the sensor.
Whilst pressing the sensor, touch
the On/Off sensor once briefly.
P1 will appear.
Touch the or sensor to set the
required programme.
Confirm with OK.
S and a number will appear.
Touch the or sensor to set the
required status/water hardness.
Confirm with OK.
The selected status will be saved.
After you have altered the setting(s)
required, switch the appliance off.
To Next Page
Loading...
