Miele DG 2840 User Manual

11232260-01
Installation
*
I
N
S
T
A
L
L
A
T
I
O
N
*
Safety instructions for installation
 Risk of damage from incorrect installation.
Incorrect installation can cause damage to the steam oven.
The steam oven must only be installed by a qualified person.
 The connection data (frequency and voltage) on the steam oven’s
data plate must correspond with those of the electricity supply in
order to ensure that no damage can occur to the steam oven.
Compare this data before connecting the appliance. If in any doubt,
consult a qualified electrician.
 Multi-socket adapters and extension leads do not guarantee the
required safety of the appliance (fire hazard). Do not use them to
connect the steam oven to the power supply.
 The socket and on-off switch should be easily accessible after the
steam oven has been installed.
 The steam oven must be positioned so that you can see the
contents of a cooking container placed on the top shelf level.
Otherwise there is a risk of injuries or spillages of hot food.

Miele DG 2840 Specifications

General

Brand	Miele
Model	DG 2840
Category	Oven
Language	English

Summary

Safety instructions for installation

General Safety Precautions

Covers risks, qualified installers, connection data, accessories, accessibility, and positioning for safe operation.

Building-in dimensions

Installation in a Tall Unit

Provides specific dimensions and requirements for installing the oven in a tall furniture unit.

Installation in a base unit

Base Unit Installation Requirements

Details requirements for installing the oven in a base unit, including cooktop considerations.

Side view

Detailed Side View Dimensions

Shows detailed side view measurements, including front panel thickness for integration.

Connection and ventilation

Connection and Ventilation Guidelines

Illustrates connection points, mains cable routing, and required ventilation cut-outs for proper installation.

Installing the steam oven

Step-by-step Installation Procedure

Outlines the process of connecting, lifting, positioning, securing, and checking the oven during installation.

Electrical connection

Electrical Connection and Safety

Recommends switched sockets, details connection data, RCDs, cable replacement, and safe disconnection procedures.