~
Do not leave cooked food in the
oven and do not use any cooking
containers which are susceptible to
corrosion as this could lead to
corrosion in the appliance.
~
The appliance is designed to detect
and then self-correct certain
operational faults. If a fault is detected,
the fault messages F06 to F95 will
appear in the display. The door of the
appliance can only be opened when
the fault message is flashing in the
display. If the fault message is not
flashing, the appliance is still
processing the fault. See "Problem
solving guide" for further information.
~
Appliances with lift-up door:
Leave the lift-up door open whenever
the appliance is being used.
~
If the appliance is installed behind a
kitchen furniture door, it may only be
used with the furniture door open.
Only close the door when the appliance
is switched off and the residual heat
indicators have gone out.
Miele cannot be held liable for
damage caused by non-compliance
with these Warning and Safety
instructions.
Warning and Safety instructions
11
To Next Page
Loading...
Need help?
General
