Interrupting operation
You can interrupt a programme at any
time, for example, to place another
container in the cooking compartment.
^
Press the Start/Stop button -.
"Stop" will appear in the time display.
The cooling down phase will begin.
In the time display, the g symbol and
"Start" will go out, and the colon will
stop flashing.
A scrolling bar will appear in the
programme/temperature display during
the cooling down phase.
The cooling down phase lasts approx.
one minute. The last temperature set
will reappear in the
programme/temperature display.
^
Wait until you hear several beeps,
and the g symbol is flashing in the
time display.
^ Pull out the shelf.
^ Open the door.
Operation
20
To Next Page
Loading...
