Electrical connection
190
Disconnecting from the mains
Danger of electrical shock.
After disconnection, ensure the
appliance cannot be switched back
on
by mistake.
To disconnect the appliance from the
mains power supply, do one of the
following depending on installation:
Safety fuses
Complet
ely remove fuses
Automatic circuit breakers
P
ress the (red) button until the middle
(black) button springs out.
Built-in circuit breakers
Circuit breakers type B or C:
Switch the on/off s
witch from 1 (on)
to 0 (off).
Residual current device (RCD)
Switch the main sw
itch from 1 (on) to
0 (off) or press the test button.
Connecting the mains cable
Danger of electric shock.
The mains connection cable must
on
ly be fitted by a suitably qualified
and competent person.
If the mains cable needs to be replaced
it must be r
eplaced with a special
connection cable, type H 05 VV-F
(PVC-insulated), available from Miele.
Wiring diagram
To Next Page
