Ventilation gaps
^
The ventilation gaps should be
cleaned regularly with a brush or
vacuum cleaner. A build-up of dust
will increase the energy consumption
of the appliance.
Door seal
Do not use any oils or grease on the
door seal as these will cause the
seal to deteriorate and become
porous over time.
The door seal should be cleaned
regularly with clean water, and then
wiped dry with a soft cloth.
After cleaning
^ Close the door.
^ Reconnect to the mains and switch
the appliance back on.
^ Switch on the Super freeze function
so that the freezer can cool down
quickly.
The indicator light will come on.
^
Once the temperature in the freezer
is sufficiently low, place the food
back in the freezer drawers and put
them back in the freezer.
^
Switch the Super freeze function off.
The indicator light will then go out.
Cleaning and care
24
To Next Page
Loading...
Need help?
General
