Demo mode
The appliance can be demonstrated in
the showroom or at exhibitions in
"Demo mode". In this mode the controls
and interior lighting are functioning but
the compressor remains switched off.
To activate Demo mode
^
Press the On/Off button.
The appliance is now switched on.
^
Press the On/Off button and the
Temperature button at the same time
for approx. 5 seconds.
The Super freeze indicator light will
start flashing, and the -25 °C field will
light up in the temperature display.
^ Press the Super freeze button.
The -25 °C field will start flashing in the
temperature display.
Demo mode is now active.
To deactivate Demo mode
^
Press the On/Off button.
The appliance is now switched on.
^
Press the On/Off button and the
Temperature button at the same time
for approx. 5 seconds.
The Super freeze indicator light will
start flashing, and the -25 °C field will
flash in the temperature display.
^
Press the Super freeze button.
The -25 °C field will light up in the
temperature display.
Demo mode has now been
deactivated.
Information for dealers
29
To Next Page
Loading...
Need help?
General
