Ventilation
Air at the back of the appliance gets
warm. It is very important for the
cooling system of the appliance to have
adequate ventilation.
Ventilation into and out of the
appliance is through the appliance
plinth. The plinth must not be
covered or blocked in any way.
The cross-sectional area for
ventilation in the plinth must be
dusted on a regular basis.
Before installing the appliance
^
Remove any cable clips from the
back of the appliance.
^ Remove the red transport fixing a,
and use the stopper supplied b to
plug the empty hole.
^ Check that all parts at the back of the
appliance are unhindered. Carefully
remove any hindrance.
Installation
32
To Next Page
Loading...
Need help?
General
