The ventilation gaps must not be
covered over.
If there is a continuous plinth in the
kitchen, a ventilation gap will need to
be made in the plinth for the appliance:
Building-under
height
Dimension D
820 mm
870 mm
100 mm
150 mm
Securing the appliance in the
niche
A fitting kit for securing the
appliance at the sides when building
it under a granite worktop is
available from Miele.
^ Use chipboard screws (4 x 19 mm) to
secure the appliance to the worktop
through the mounting plate, as
shown.
Building in the appliance
41
To Next Page
Loading...
