Salt indicator
When the salt reservoir is empty the in-
dicator light k comes on. The reservoir
should be refilled with dishwasher salt
for reactivation.
After the reservoir has been refilled with
salt the water softener is automatically
reactivated either the next time the dish-
washer is run or the time after that.
The indicator light k illuminates during
this process.
Note
With very soft water, i. e. constantly at a
level below 70 mg/l (4 °d), the reservoir
does not have to be filled with salt and
although the salt light does come on,
this can be disregarded.
The k indicator light (marked PC) is
also designated for any future updates
to programmes, (see After Sales Servi-
ce).
Water softener
20
To Next Page
Loading...
