EasyManua.ls Logo

Miele G 673 - Adding Rinse Aid

Miele G 673
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Adding rinse aid
Rinse aid is necessary to ensure that
water does not cling and leave marks
on crockery during the drying phase.
Rinse aid is poured into the storage
reservoir and the amount set is dis-
pensed automatically.
The rinse aid reservoir holds approx.
130 cm
3
.
Inadvertently filling the rinse aid
reservoir with powder detergent (or
liquid detergent) always leads to
damage to the reservoir.
Only pour
rinse aid formulated for
domestic dishwashers into the reser-
voir.
Although it is possible to use
house-
hold vinegar with a max. 5% acid
content, or liquid citric acid up to
50% acid as an alternative, the re-
sulting rinsing and drying quality
will not be as good as when rinse
aid is used.
Do not use vinegar with a high acid
content (e.g. vinegar essence 25%
acid). This must
not be used as its
use would damage the dishwasher.
Add rinse aid when the indicator
light H on the control panel comes
on.
Press the button in (in the direction
of the arrow) until the flap springs
open.
Adding rinse aid
21

Table of Contents