6. Adjusting the door springs
The door springs are correctly adjusted
when a half opened door (approx. 45°
opening angle) remains in this position
when released.
If the door lowers to the horizontal posi-
tion the door springs need to be tight-
ened.
If, however, it rises up, then the springs
need to be released.
The adjusting screw is located in the
upper front strip at the left hand side of
the dishwasher.
Open the dishwasher door.
Adjust the door spring with a Torx
T20 screwdriver until it is correctly
balanced:
– turn clockwise = tighten
– turn anti-clockwise = loosen.
Installation
73
To Next Page
Loading...
