Fitting the door front
The door front is correctly fitted when:
– the lower lugs of the fixing bracket
rest firmly in the lower slits of the
dishwasher outer door panel.
– The prongs of the fixing bracket lie
on the sprung bolts in the upper cor-
ners of the dishwasher door.
Pull the dishwasher out of the recess
enough for the door front fixing
screws to be easily accessible, and
the upper edge of the dishwasher
door to be unobstructed by the work
top.
Hang the door front so that the lower
lugs of the fixing bracket fit into the
lower slits of the dishwasher outer
door panel, and draw slightly up-
wards.
Installation
70
To Next Page
Loading...
