Miele G 7110 - AutoDos and Rinse aid settings

Settings
36
AutoDos (automatic
dispensing)
Automatic dispensing automatically
adjusts the amount of detergent to the
selected programme. In the Auto45–
65°C programme, the quantity is
adjusted depending on the degree of
soiling of the crockery.
If you want to extend the service life of
the PowerDisk, you can reduce the
dispensing quantity. The programme’s
cleaning performance may decrease as
a result.
If you want to improve the cleaning
performance, you can increase the
dispensing quantity. This reduces the
service life of the PowerDisk.
Dosage amount settings
For best results, you can adjust the
dispensing quantity of the PowerDisk.
 Select the Dosage amount menu
option and confirm with OK.
 Select the setting you want and
confirm with OK.
Rinse aid
You can adjust the rinse aid dosage for
best results.
The rinse aid dosage can be set from 0
to 6ml.
3ml is the factory default setting.
The rinse aid dosage can turn out to be
higher than the set value due to the
automatic adjustment of the
programme.
If spots appear on crockery and
glassware:
- Increase the rinse aid dosage.
If clouding or smearing appears on
crockery and glassware:
- Decrease the rinse aid dosage.