EasyManua.ls Logo

Miele G 7110 - AutoDos system operation

Miele G 7110
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Detergent
61
Automatic dispensing/AutoDos
Before you can use AutoDos, you must
insert a PowerDisk containing powder
detergent into the PowerDisk
compartment.
One PowerDisk contains enough
detergent for approx. 20cycles,
depending on the chosen programme.
PowerDisks are available to order
directly from Miele’s online store, the
Miele Customer Service Department
or from your Miele dealer.
Risk of chemical burns from
residual detergent.
Detergents have a caustic effect.
This can cause health problems and
damage to surfaces. If the AutoDos
is used incorrectly or leaks, residual
detergent may drip onto the floor
area in front of the dishwasher.
Always remove residual detergent
from in front of the dishwasher
immediately.
Activating AutoDos
Switch the dishwasher on with the
button.
Before you first use AutoDos, remove
the transport locking device from the
PowerDisk compartment and dispose
of it appropriately.
Insert a PowerDisk (see “Automatic
dispensing/AutoDos – Inserting a
PowerDisk”).
TheAutoDos function will be
activated automatically.
The message AutoDos activated will
appear on the display.
This setting applies to all programmes
and can be changed at any time using
theAutoDos button.
If no programme is started for
48hours, the PowerDisk will
automatically be rotated so that the
detergent does not clump together. If
this happens, the messagePowder
refreshing will be shown in the display
when the dishwasher is switched on.
No detergent will be dispensed.

Table of Contents