Miele G 7110 - Options; Timer function and delayed start

Options
71
Timer
You can set the start time of a
programme. The programme start time
can be delayed for between 30minutes
and 24hours.
With start time delays between
30minutes and 3hours, the delay can
be set in 30minute stages. It is set in
hours for periods longer than this.
With manual detergent dispensing,
the detergent will clump together if
the detergent compartment is not dry
and this may mean it is not fully
rinsed out.
When using the timer function, make
sure that the detergent compartment
is dry before adding detergent. Wipe
dry with a cloth first, if necessary.
Do not use any liquid cleaning
agents. These can leak out.
 Danger to health due to
detergent.
To prevent children coming into
contact with dishwasher detergent:
Do not fill the detergent dispenser
until just before starting the
programme, i.e. before you activate
the timer. Use the safety lock to
secure the dishwasher door.
Activating the timer
 Switch the dishwasher on with the
button.
The Start indicator light will flash.
 Select the programme you want to
use.
 Press theTimer button.
The most recently set “Start in” time will
be shown on the display. The Timer
indicator light will light up.
 Set the required time after which the
programme should start automatically
using the buttons.
Pressing and holding button or  will
automatically adjust the time.
 Confirm with OK.
The Startindicator light will come on.