Settings
39
Displaying Connection status
You can call up the current connection
status of your dishwasher.
Select the Connection status menu
option and confirm with OK.
Use the buttons to consecutively
call up the WiFi signal strength, the
name of your router and the
associated IP address.
Select OK to confirm the messages.
Set up again
This menu option only appears if you
have already connected your
dishwasher to your WiFi network.
Connect using App
Select the Connect using Appmenu
option and confirm with OK.
Follow the instructions in the app.
Connect using WPS
Select the Connect using WPSmenu
option and confirm with OK.
Follow the instructions in the display.
Reset
This menu option only appears if you
have already connected your
dishwasher to your WiFi network.
You can use this menu option to reset
all WiFi module settings to the factory
default settings.
The network configuration should be
reset whenever a dishwasher is being
disposed of or sold, or if a used
dishwasher is being put into operation.
This is the only way to ensure that all
personal data has been removed and
the previous owner will no longer be
able to access the dishwasher.
Select the Reset menu option and
confirm with OK.
To Next Page
