Miele G 7130 - Autodos (Automatic Dispensing); Rinse Aid; Save Extras

Settings
37
AutoDos (automatic dispens-
ing)
Automatic dispensing automatically ad-
justs the amount of detergent to the se-
lected programme. In the Auto pro-
gramme, the quantity is adjusted de-
pending on the degree of soiling of the
crockery.
If you want to extend the service life of
the PowerDisk, you can reduce the dis-
pensing quantity. The programme’s
cleaning performance may decrease as
a result.
If you want to improve the cleaning per-
formance, you can increase the dis-
pensing quantity. This reduces the ser-
vice life of the PowerDisk.
Setting the Dosage amount
For best results, you can adjust the dis-
pensing quantity of the PowerDisk.
 Select the Dosage amount menu op-
tion.
 Select the desired setting.
Rinse aid
You can adjust the rinse aid dosage for
best results.
The rinse aid dosage can be set from 0
to 6ml.
3ml is the factory default setting.
The rinse aid dosage can turn out to be
higher than the set value due to the
automatic adjustment of the pro-
gramme.
If spots appear on crockery and glass-
ware:
- Increase the rinse aid dosage.
If clouding or smearing appears on
crockery and glassware:
- Decrease the rinse aid dosage.
Save Extras
You can set whether the selected extras
are to remain permanently activated for
the respective programme.
For the ECO programme, an extra can
only be activated for one programme
sequence.