Miele G 7130 - Options; Timer

Options
76
Timer
You can set the start time of a pro-
gramme. The programme start time can
be delayed for between 30minutes and
24hours.
With start time delays between
30minutes and 3hours, the delay can
be set in 30minute stages. It is set in
hours for periods longer than this.
With manual detergent dispensing,
the detergent can clump together if
the detergent compartment is not
dry, and it may not be fully rinsed
out.
When using the timer function, make
sure that the detergent compartment
is dry before adding detergent. Wipe
dry with a cloth first, if necessary.
Do not use liquid detergents. These
can leak out.
 Danger to health due to deter-
gent.
To prevent children coming into con-
tact with dishwasher detergent:
Do not fill the detergent dispenser
until just before starting the pro-
gramme, i.e. before you activate the
timer. Use the safety lock to secure
the dishwasher door (see “Before us-
ing for the first time – Safety lock”).
Activating the timer
 Switch the dishwasher on with the
button.
The Start indicator light will flash.
 Select the programme you want to
use.
 Press theTimer button.
The most recently set “Start in” time will
be shown on the display. The Timer
indicator light will light up.
 Set the required time after which the
programme should start automatically
using the buttons.
Pressing and holding button or  will
automatically adjust the time.
 Confirm with OK.
The Start indicator light will come on.