Settings
43
2nd interim rinse
You can choose this function to in-
crease the cleaning performance of the
programmes with a second interim
rinse.
When this function is activated, water
consumption may increase.
If this function is switched on, it will be
applied to all programmes until it is
switched off again (except for the ECO
programme).
Hygiene cycle
If you mainly use low temperature pro-
grammes (<50°C), there is a risk of
bacteria and unpleasant odours build-
ing up in the wash cabinet (see “Clean-
ing and care – Hygiene cycle”).
If this function is switched on, a mes-
sage will be displayed recommending
the use of a high temperature pro-
gramme after several low temperature
programmes have been run.
Water connection
You can set your water connection
type.
If you select Automatic, the dish-
washer detects which water connec-
tion is currently being used and auto-
matically selects the right setting.
Select Cold water, if you are only using
a cold water connection.
Select Warm water, if you are only us-
ing a hot water connection.
To Next Page
Loading...
