Settings
42
Consumption display
(EcoFeedback)
You can set whether the energy and
water consumption is displayed for the
selected programme. This function
shows the estimated consumption be-
fore a programme sequence and the
actual consumption after the end of the
programme (see “Caring for the envir-
onment – EcoFeedback consumption
indicator”).
Display brightness
You can set the display brightness to
one of seven different levels.
Refill reminders
If you only ever use combination deter-
gent products or automatic dispensing
using Miele PowerDisks (if available),
you can switch off the refill reminders
for dishwasher salt and rinse aid if you
wish.
Please make sure that if you stop us-
ing combination detergents, you refill
the dishwasher salt and rinse aid.
Switch the refill reminders back on.
AutoOpen
In some programmes the door automat-
ically opens slightly to assist the drying
process.
This function can be deactivated if you
wish. However, this negatively affects
the drying process in most cases.
Risk of injury due to door open-
ing automatically.
The door may open automatically at
the end of the programme.
Keep the area around the door free
of obstructions.
Risk of damage due to steam.
Steam from the dishwasher could
damage delicate housing units and
the edges of worktops when you
open the door at the end of the pro-
gramme if the fan is no longer run-
ning.
If you have deactivated the auto-
matic door opening function but
would still like to open the door at
the end of the programme, then
make sure that you open the door
fully.
To Next Page
Loading...
