Miele G 7130 - System Lock; Deactivating the System Lock; Information

Settings
44
System lock

The system lock prevents your dish-
washer being used without your know-
ledge.
If an attempt is made to switch the
dishwasher on when the system lock is
activated, the symbol will appear in
the display.
The lock must be deactivated before
the dishwasher can be used.
The appliance will lock each time it is
switched on while the system lock is
activated.
The appliance is delivered with the sys-
tem lock deactivated.
Deactivating the system lock
To unlock the dishwasher, proceed as
follows:
 Switch the dishwasher on with the
button.
The symbol appears in the display.
 Press the OK button for 6seconds.
After 6seconds, the dishwasher will be
unlocked and ready for use.
Information
You can display the following informa-
tion about your dishwasher:
- Operating hours (see also “Options –
Displaying the operating hours”)
- Programme sequences
- Total consumption
- Fault memory
- Data plate
- Software version