Miele G 7130 - Page 39

Settings
39
Connect using WPS
As an alternative to networking via the
Miele app, you can connect your dish-
washer to your WiFi network using WPS
(Wireless Protected Setup).
Your WiFi router must support WPS.
 Select the Connect using WPS menu
option and confirm with OK.
 Confirm the message Press WPS but-
ton with OK.
 Activate the WPS function on your
router within 2minutes.
 Once the connection has been estab-
lished, confirm the message with OK.
If the connection fails, you have prob-
ably not activated WPS on your router
quickly enough. Repeat the steps
above.
Deactivate
If you do not wish to use the WiFi mod-
ule of your dishwasher, you can switch
it off.
 Select the Deactivate menu option.
In the Miele@home menu, the menu op-
tion Deactivate will now be displayed in-
stead of Activate.
Activate
If you wish to connect your dishwasher
to your WiFi network, you can turn on
the WiFi module.
 Select the Activate menu option.
In the Miele@home menu, the menu op-
tion Activate will now be displayed in-
stead of Deactivate.
Displaying Connection status
You can call up the current connection
status of your dishwasher.
 Select the Connection status menu op-
tion and confirm with OK.
 Use the buttons to consecutively
call up the WiFi signal strength, the
name of your router and the associ-
ated IP address.
 Select OK to confirm the messages.