Miele G 7216 - Hygiene Cycle; Water Connection; System Lock; Deactivating the System Lock

Settings
38
2nd interim rinse
You can choose this function to increase
the cleaning performance of the pro-
grams with a second interim rinse.
When this function is activated, water
consumption may increase.
If this function is switched on, it will be
applied to all programs until it is
switched off again.
Hygiene cycle
If you mainly use low-temperature pro-
grams , there is a risk of bacteria and
unpleasant odors building up in the
wash cabinet (see “Hygiene cycle” un-
der “Cleaning and care”).
If this function is switched on, a mes-
sage will be displayed recommending
the use of a high-temperature program
after several low-temperature programs
have been run.
Water connection
You can set your water connection type.
 If you select Automatic, the dish-
washer detects which water connec-
tion is currently being used and auto-
matically selects the right setting.
 Select Cold water, if you are only using
a cold water connection.
 Select Warm water, if you are only us-
ing a hot water connection.
System lock

The system lock prevents your dish-
washer being used without your knowl-
edge.
If an attempt is made to turn the dish-
washer on when the system lock is acti-
vated, the symbol will appear in the
display.
The lock must be deactivated before the
dishwasher can be used.
The appliance will lock each time it is
switched on while the system lock is ac-
tivated.
The appliance is delivered with the sys-
tem lock deactivated.
Deactivating the system lock
To unlock the dishwasher, proceed as
follows:
 Turn the dishwasher on with the
button.
The symbol appears in the display.
 Press the OK button for 6seconds.
After 6seconds, the dishwasher will be
unlocked and ready for use.