Miele G 7216 - Cleaning the Drain Pump

Cleaning and care
78
Cleaning the drain pump
If water remains in the wash cabinet af-
ter the end of a program, the water has
not been drained off. The drain pump
may be blocked by foreign objects.
These foreign objects are easy to re-
move.
 Disconnect the dishwasher from the
power supply.
To do this, turn off the dishwasher
and disconnect the electrical plug.
 Take the filter combination out of the
wash cabinet (see “Cleaning the fil-
ters” under “Cleaning and care”).
 Scoop the water out of the wash cab-
inet using a small container.
1
2
 Press the catch of the drain pump
cover inward.
 Tip the cover inward until it is re-
leased.
 Rinse the cover thoroughly under run-
ning water and remove any foreign
objects.