Miele G 7216 - Rinse Aid; Save Extras; Miele@Home (Depending on the Model)

Settings
33
Rinse Aid
You can adjust the rinse aid dosage for
best results.
The rinse aid dosage can be set from 0
to 6ml.
3ml is the factory default setting.
The rinse aid dosage can turn out to be
higher than the set value due to the au-
tomatic adjustment of the program.
If spots appear on dishes and glass-
ware:
- Increase the rinse aid dosage.
If clouding or smearing appears on
dishes and glassware:
- Decrease the rinse aid dosage.
Save Extras
You can set whether the selected extras
are to remain permanently activated for
the respective program.
Miele@home (depending on
the model)
Your dishwasher is equipped with an in-
tegrated Wi-Fi module.
You can connect your dishwasher to
your Wi-Fi network.
This will increase the energy consump-
tion, even when the dishwasher is
turned off.
The Settings and Miele@home settings
menus will be added as additional menu
options.
Make sure that your Wi-Fi network
signal strength is strong enough at
the installation site of your dish-
washer.
There are a number of ways of connect-
ing your dishwasher to your Wi-Fi net-
work:
Connect using App
The Miele app is available to download
free of charge from the Apple App
Store
®
or from the Google Play Store™.
 Select the Connect using App menu
option and confirm with OK.
 Follow the instructions in the app.
Once your dishwasher is connected to
your WiFi network, you can use the app
to carry out the following tasks:
- Control your dishwasher remotely
- Call up information on the operating
status of your dishwasher