Miele G 7216 - End of the Program; Energy Management

Operation
58
End of the program
The program has ended when the dis-
play shows the message Ready.
In some programs, if the AutoOpen
function is activated, the door will auto-
matically open slightly (see “AutoOpen”
under “Settings”). This improves the
drying process.
The drying fan may continue to run for
a few minutes at the end of the pro-
gram.
If you are not satisfied with the clean-
ing or drying results, you can activate
the Extra Clean or Extra Dry functions
to boost the performance of the pro-
grams (see “Extra Clean” or “Extra
Dry” under “Extras”).
 Risk of damage due to steam.
Steam from the dishwasher could
damage the edges of delicate cabi-
nets and countertops when you open
the door at the end of the program if
the fan is no longer running.
If you have deactivated the automatic
door opening function (see “Au-
toOpen” under “Settings”), but
would still like to open the door at
the end of the program, then make
sure that you open the door fully.
Energy management
To save energy, the dishwasher will
switch off automatically 10minutes af-
ter the last time a button is pressed or
after the end of a program.
You can turn the dishwasher back on
again with the button.
The dishwasher will not turn itself off
while a program is running or if there is
a fault.