Miele G 7836 CD - Preparing the DOS dispensers

Preparing the DOS dispensers
The agents can be filled into 5 l plastic
containers, which are colour coded for
the relevant dispensing system.
When first commissioning, or when the
message FILL CONTAINER DOS 1
and/or DOS 2, 3, 4 flashes in the
display after switching on or at the end
of a programme, fill the storage
container with the relevant liquid
chemical agent.
If the message CHECK DISPENSING
SYSTEM 1 and/or CHECK DISPENSING
SYSTEM 2, 3, 4 flashes in the display,
check the reservoirs and dispensing
tubes, and refill or exchange them if
empty.
The programme will stop automatically.
When first commissioning or when
the message CHECK DISPENSING
SYSTEM... appears, start the
DOS-FILL Programme to vent the
dispensing system (see "Venting the
dispensing system").
,
Take great care when handling
liquid agents and additives. These
may contain irritant or corrosive
ingredients.
Please follow the manufacturer's
instructions.
Wear protective gloves and goggles.
Dispensing liquid chemical agents
32