Cleaning the control panel
^
The control panel should only be
cleaned using a damp cloth or with a
proprietary cleaning agent for glass
or plastic surfaces.
An approved and listed disinfecting
agent can be used to wipe surfaces.
,
Do not use abrasive cleaners or
all-purpose cleaners.
Because of their chemical
composition they could cause
serious damage to plastic
components.
Cleaning the front of the
machine
^ The front should be cleaned using a
damp cloth and a little washing-up
liquid, or with a non-abrasive
proprietary cleaning agent designed
for use on stainless steel.
^ To help prevent fingermarks etc. a
stainless steel conditioning agent,
e.g. Neoblank (available from the
Miele Spare Parts Department) can
also be used.
,
Do not use any cleaning agents
containing ammonia or thinners as
these can damage the surface
material.
Cleaning the wash cabinet
The wash cabinet is generally
self-cleaning.
However, should a build-up of deposits
occur in the cabinet please contact the
Miele Service Department for advice.
Cleaning the door seals
The door seals should be cleaned
regularly with a damp cloth to remove
any soiling.
Seals which are no longer tight or which
have suffered damage must be
replaced with new ones by the Service
Department.
Protein test
Cleaning results should be subjected to
period protein tests, e.g. with the Miele
test kit.
Maintenance
46
To Next Page
