Frequently Asked Questions
85
Problem Possible cause and remedy
appears in the
display.
A fault has occurred that you cannot resolve.
Contact Miele Service.
A noise is heard after
the cooking process is
complete.
The cooling fan will continue to run for a while after
the oven has been switched off to prevent any
humidity building up in the oven, on the control panel
or in the cabinet carcase.
The cooling fan will switch itself off automatically
after a certain period of time.
Spots appear on the
catalytic surfaces.
The catalytic cleaning process does not remove
spices, sugar or similar deposits.
Take catalytic panels out of the oven and remove
this type of deposit with warm water and liquid
dish soap applied with a soft brush (see "Cleaning
catalytic enamelled panels").
Cakes and biscuits are
not baked properly after
following the times
given in the baking
chart.
A different temperature than that given in the recipe
was used.
Select the temperature required for the recipe.
The ingredient quantities are different from those
given in the recipe.
Check if you have amended the recipe. The
addition of more liquid or more eggs will make a
wetter mixture which will take longer to cook.
The browning is
uneven.
The wrong temperature or shelf level was selected.
There will always be a slight unevenness. If
browning is very uneven, check whether the
correct temperature and shelf level were selected.
The material or colour of the bakeware is not suitable
for the oven function selected.
When using Surround use matt, dark coloured
tins. Light coloured, shiny tins will not produce as
desirable results.
To Next Page
Loading...
