Miele H2265E - Appliance Data Plate and Voltage

Electrical connection
89
Data plate
The silver data plate is located along
the front side of the oven with the door
open (see "Guide to the oven").
 Before connecting the appliance
to the power supply, make sure that
the voltage and frequency listed on
the data plate correspond with the
household electrical supply. This
data must correspond to prevent
machine damage. Consult an
electrician if in doubt.
H2265B
Electrical connection 208V
 Do not connect the oven to a
240V power supply.
The oven is equipped with a 6'
3" (1.9m) long flexible power cord with
a NEMA 14-30P plug, ready for
connection to a 120/208V, 60Hz, 20A
power supply.
Maximum connected load: 3,600W
Electrical connection 240V
The oven is equipped with a 6'
3" (1.9m) long flexible power cord with
a NEMA 14-30P plug, ready for
connection to a 120/240V, 60Hz, 20A
power supply.
Maximum connected load: 3,800W
H2265E
Electrical connection 208V
 Do not connect the oven to a
240V power supply.
The oven is equipped with a 6'
3" (1.9m) long flexible power cord with
a NEMA 14-50P plug, ready for
connection to a 120/208V, 60Hz, 40A
power supply.
Maximum connected load: 9,700W, in
combination with Miele cooktop
KM6002.
Electrical connection 240V
The oven is equipped with a 6'
3" (1.9m) long flexible power cord with
a NEMA 14-50P plug, ready for
connection to a 120/240V, 60Hz, 40A
power supply.
Maximum connected load: 9,900W, in
combination with Miele cooktop
KM6002.
SAVE THESE INSTRUCTIONS FOR
THE ELECTRICAL INSPECTOR'S
USE.