Miele H2661B - FlexiClip Telescopic Runners; Fitting and Removing FlexiClip Runners

Features
22
FlexiClip telescopic runners HFC70
The FlexiClip telescopic runners can be
used with any shelf level.
Push the FlexiClip telescopic runners
right into the oven before placing
accessories on them.
The accessories will then
automatically sit securely in between
the stoppers at either end of each
runner and be prevented from sliding
off.
The FlexiClip runners can support a
maximum load of 15kg.
Fitting and removing FlexiClip
telescopic runners
 Danger of burning.
Make sure the oven heating
elements are switched off and cool.
The FlexiClip runners are fitted in
between the two rails that make up a
shelf level.
The FlexiClip runner with the Miele logo
is fitted on the right.
When fitting the FlexiClip telescopic
runners do not extend them.
 Hook the FlexiClip runner onto the
front of the lower rail of a side runner
(1.) and then push it along the rail into
the oven compartment (2.).