Cleaning and care
82
Danger of injury.
Always remove the door before
disassembling it.
Place the door on a protective
surface (e.g. on a tea towel) with the
outside pane facing downwards to
prevent it getting scratched.
The door handle should line up with
the edge of the table so that the glass
lies flat and does not get broken
during cleaning.
Flip the two glass pane retainers
outwards to open them.
To remove the inner panes:
Carefully lift the inner pane up and
out of the plastic strip.
Lift the middle pane up gently and
pull it out.
Clean the door panes and other parts
with a clean sponge and a solution of
hot water and washing-up liquid or a
clean damp microfibre cloth.
Dry all parts with a soft cloth.
To Next Page
