Problem solving guide
90
Problem Cause and remedy
Browning is uneven. The wrong temperature or shelf level was selected.
There will always be a slight unevenness. If the
unevenness is pronounced, check that the correct
temperature and shelf level have been selected.
The material or colour of the baking tin is not suitable
for the oven function.
When using Conventional heat use matt, dark
coloured tins. Light coloured, shiny pans will not
produce as desirable results.
FlexiClip runners are
not running smoothly.
The bearings in the FlexiClip runners are not
sufficiently lubricated.
Lubricate the bearings with the special Miele
lubricant.
Only use this special lubricant, as it is designed to
withstand high temperatures in the oven. Other
lubricants can harden and stick to the FlexiClip
runners when they are heated. The Miele lubricant
is available to order from Miele or via the online
Miele shop.
The top oven lighting
does not turn on.
The halogen lamp needs replacing.
Danger of burning.
Make sure the oven heating elements are switched
off and that the oven cavity is cool.
Disconnect the appliance from the mains.
Turn the lamp cover a quarter turn anti-clockwise
to release it and then pull it together with its seal
downwards to take it out.
Replace it with a new halogen lamp (Osram 66725
AM/A, 230 V, 25 W, G9).
Refit the lamp cover together with its seal and turn
clockwise to secure.
Reconnect the oven to the electricity supply.
You have selected Gentle bake . The oven lighting
does not come on with this function.
To Next Page
Loading...
Need help?
General
