Operation
41
Starting the programme
Start the programme by closing the
d
oor.
The programme will begin.
The In-operation indicator light comes
o
n t
o show that a programme has been
started.
A programme can only be cancelled
in the first few
mi
nutes. Otherwise
the programme must continue to the
end so that important programme
stages (e.g. reactivating the water
softener) are not omitted.
Display
The duration of the programme selec‐
ted app
ears in hours and minutes in the
display before the programme begins.
During the programme the time left until
the end of the programme is displayed.
The programme duration displayed may
var
y
with the same programme. It is in‐
fluenced by, among other things, the
water temperature at each intake, the
reactivation process, the type of deter‐
gent, the amount of crockery and how
dirty it is.
When a programme is selected for the
first time, the display shows an aver
ag
e
duration for a cold water intake.
The durations shown in the Programme
cha
r
t refer to standard test loads and
temperatures.
Each time a programme is run, the
el
ectr
onic unit takes the new conditions
into account, and calculates the pro‐
gramme duration required.
To Next Page
Loading...
Need help?
General
