Problem solving guide
66
Water drainage fault
Problem Cause and remedy
The In-operation indica‐
tor is fl
ashing quickly.
The buzzer is sounding.
The Inlet/Drain indica‐
tor is flashing and fault
code has appeared
in the display.
Before rectifying the problem:
Switch the dishwasher off with the butt
on.
The water outlet is restricted.
There
might be water in the wash cabinet.
Clean the filter combination (see "Cleaning and
car
e, Cleaning the filters").
Clean the drain pump (see "Maintenance").
Clean
the non-return valve (see "Maintenance").
Remove any ki
nk or loop in the dr
ain hose.
To Next Page
Loading...
Need help?
General
