Programme options
48
Open the door if you need
to check
how long the delay period has left to
run.
The time up until the programme starts
will show counting down in the display
in
hours for durations above 10 hours,
and in minutes for durations below this.
When the set time is reached, the pro‐
gr
a
mme selected will start automatical‐
ly. The time remaining will appear in the
display and the indicator light will go
out.
How the Delay start time is shown in
the display:
up to 59 minutes:
e.g. 30 min
ut
es = .
1 hour up to 9 hours 30 minutes:
e.g. 5 hours = .
over 10 hours:
e.g. 15 hours =
Starting a programme before the De‐
l
ay start period has elapsed:
A programme can be started before the
Delay start period has elapsed.
P
roceed as follows:
Op
en the door.
Switch the dishwasher off with the
butt
on.
Switch the dishwasher on again with
the
b
utt
on.
Select the pr
ogr
amme you want.
S
tart the programme by closing the
door
.
The In-operation indicator light comes
on t
o show that a pr
ogramme has been
started.
To Next Page
Loading...
Need help?
General
