Miele HG06 User Manual

Problem solving guide
64
Problem Cause and remedy
The In-operation indica‐
tor is fl
ashing quickly.
The buzzer is sounding.
All the programme indi‐
cators flash when the
door is open.
Fault code  shows in
the display.
There may be a technical fault.
 Switch the dishwasher off with the  b
utt
on.
 Switch the dishwasher back on aft
er a few sec‐
onds.
 Select the progr
amme you want.
 Close
the door.
If the indicat
or lights flash again, there is a technical
fault.
 Call the Miele Service Department.
Fault :
The buzz
er is sounding
continuously.
The drain pump may al‐
so be running, even
with the door open.
The Waterproof system has reacted.
 Close
the stopcock.
 C
all the Miele Service Department.
Fault : A fault has occurred in the circulation pump.
 Switch the dishwasher off for at least 30 seconds
with the  butt
on.
 Switch the dishwasher back on.
 Select the pr
ogr
amme you want.
 Close
the door.
If t
he fault message appears again, there is a techni‐
cal fault.
 Call the Miele Service Department.

Miele HG06 Specifications

General

Brand	Miele
Model	HG06
Category	Dishwasher
Language	English