Miele HG07-W User Manual

Before using for the first time
27
Activating AutoDos
The display changes to the settings
screen for AutoDos (see “Automatic dis-
pensing/AutoDos” under “Detergent”).
Even if you do not wish to use Auto-
Dos, you must remove the transport
locking device from the PowerDisk
compartment before running the first
program (see “Activating AutoDos”
under “Detergent”).
You can activate AutoDos.
If you do not wish to use AutoDos, you
can manually dispense the detergent
via the detergent compartment (see
“Manual detergent dispensing” under
“Detergent”).
 Select the setting you want and con-
firm with OK.
This setting applies to all programs and
you can change it in a program's Op-
tions menu.
Finally, prompts will appear in the dis-
play.
After confirming these prompts with
OK, the messages Refill salt and start
the “QuickIntenseWash” program with the
“Express” option without a load and Re-
fill rinse aid may appear.
 Add salt and rinse aid if necessary
(see “Reactivation salt” and “Rinse
aid” under “Before using for the first
time”).
 Select OK to confirm the messages.
The display will change to the Programs
menu.

Miele HG07-W Specifications

General

Brand	Miele
Model	HG07-W
Category	Dishwasher
Language	English