Settings
41
Remote control
This menu option will only be dis-
played if you have connected your
dishwasher to your WiFi network (see
“Miele@home” under “Settings”).
If you wish to permanently turn off the
Remote control option, you can do this
under this menu option. The sensor
button will then no longer be available
to select until you change this setting
again.
Even if the Remote control option is
turned off, you can use Miele to call up
information about your appliance. How-
ever, you cannot start any programs or
change any settings from it.
SuperVision
This menu option will only be dis-
played if you have connected your
dishwasher to your WiFi network (see
“Miele@home” under “Settings”).
In development for your market.
Remote Update
The RemoteUpdate menu option is
only displayed and can only be se-
lected if the requirements for using
Miele@home have been met (see
“Miele@home” under “Before using for
the first time”).
The RemoteUpdate function is used for
updating the software in your dish-
washer. If an update is available for
your dishwasher, it will automatically
download it. Updates will not be in-
stalled automatically. They must be initi-
ated manually.
If you do not install an update, you can
continue to use your dishwasher as
usual. However, Miele recommends in-
stalling updates.
Activating/deactivating
The RemoteUpdate function is acti-
vated as standard. Available updates
will be downloaded automatically but
will only be installed if you initiate instal-
lation manually.
Deactivate RemoteUpdate if you do not
want any updates to be downloaded
automatically.
To Next Page
Loading...
Need help?
General
