Settings
36
Setting the water hardness
Select the water hardness level in
your area and confirm with OK.
AutoDos (AutoDos)
AutoDos automatically adjusts the
amount of detergent to the selected
program. In the Auto program, the
quantity is adjusted depending on the
degree of soiling of the dishware.
If you want to extend the service life of
the PowerDisk, you can reduce the dis-
pensing quantity. The program’s clean-
ing performance may decrease as a re-
sult.
If you want to improve the cleaning per-
formance, you can increase the dis-
pensing quantity. This reduces the ser-
vice life of the PowerDisk.
Setting theDosage amount
For best results, you can adjust the dis-
pensing quantity of the PowerDisk.
Select the Dosage amount menu op-
tion and confirm with OK.
Select the setting you want and con-
firm with OK.
To Next Page
Loading...
Need help?
General
