Settings
44
Changing the electricity-rate times
You can change the start, finish, or pri-
ority of an electricity-rate time.
Select an electricity rate time from
R1–R3 to change.
Select the Change option.
Change the times if necessary and
confirm with OK.
Change the priority if necessary.
The selected settings are displayed.
Confirm the display with OK.
The change will be saved.
Deleting the electricity-rate times
You can delete the settings for an elec-
tricity-rate time and in doing so deacti-
vate the EcoStart option for this time
zone.
Select an electricity-rate time from
R1–R3 to delete.
Select Delete.
Confirm the query with Yes.
The settings for the electricity-rate time
selected will be reset.
Confirm the message with OK.
The electricity-rate time will be deleted.
Temperature
You can set whether the temperature
should be displayed in °F/Fahrenheit or
°C/Celsius.
The factory default setting is °C/Cel-
sius.
Display
You can set the display brightness and
the type of display.
Brightness
You can set the display brightness to
one of 7 different levels.
Color scheme
You can select a bright or dark color
scheme for the display.
To Next Page
Loading...
Need help?
General
