Options
77
Setting “Start at”
With the Start at function, you set the
exact time at which you want the pro-
gram to start.
Set the start time and confirm with
OK.
The saved start time for the selected
program will appear in the display for
several minutes.
When the set time is reached, the pro-
gram selected will begin automatically.
Setting “Finish at”
Use the Finish at function to set the lat-
est time by which the program selected
has to be finished.
Set the finish time and confirm with
OK.
The estimated start time for the se-
lected program will appear in the dis-
play for several minutes.
When the set time is reached, the pro-
gram selected will begin automatically.
Setting EcoStart
The EcoStart function enables you to
benefit from cheaper electricity rates at
night. Before you can use this option,
you need to set up to 3electricity-rate
time zones (see “EcoStart” under “Set-
tings”).
Then set the time by which the selected
program has to be finished.
The dishwasher will then start automati-
cally in the most economical rate zone
within the time set.
Set the latest finish time you want
and confirm with OK.
Waiting for EcoStart will appear in the dis-
play.
The program will start automatically
when the estimated start time is
reached.
To Next Page
Loading...
Need help?
General
