Auto heat-up
When Auto heat-up has been activated,
the cooking zone switches on
automatically at the highest setting and
then switches to the continued cooking
setting selected. The heat-up time
depends on which continued cooking
setting has been chosen (see chart).
As the higher continued cooking
settings are generally used for frying
food, only a relatively short heat-up time
is needed to heat up the pan initially.
Continued
cooking setting*
Heat-up time
in minutes and
seconds
(approx.)
1 1:20
2 2:45
3 4:05
4 5:30
5 6:50
6 1:20
7 2:45
8 2:45
9-
How to activate Auto heat-up
^
While a 0 is flashing in the cooking
zone display, touch the - sensor until
the required continued cooking
setting appears, e.g. 6.
During the heat-up time a dot will light
up to the right of the continued cooking
setting, and go out at the end of it.
At any point during the heat-up time
you can use - or + to increase or lower
the continued cooking setting. The Auto
heat-up time will alter accordingly.
Operation
20
To Next Page
Loading...
