Auto heat-up
When Auto heat-up has been activated,
the cooking zone switches on
automatically at the highest setting and
then switches to the continued cooking
setting which you have previously
selected. The heat-up time depends on
which continued cooking setting has
been chosen (see chart).
Taking a pan off the zone whilst Auto
heat-up is in operation interrupts the
Auto heat-up. It will resume if a pan is
placed back on the zone within 3
minutes.
Continued
cooking setting
Heat-up time
in minutes and
seconds
(approx.)
1 0:15
2 0:15
3 0:25
4 0:50
5 2:00
6 5:50
7 2:50
8 2:50
9-
To activate Auto heat-up
^
While a 0 is flashing in the cooking
zone display, touch the - sensor until
the required continued cooking
setting appears, e.g. 6.
During the heat-up time an indicator
lamp to the right of the continued
cooking setting will light up, and go out
at the end of it.
At any point during the Auto heat-up
time you can use - or + to lower or
increase the continued cooking setting.
The Auto heat-up time will alter
accordingly.
Use
22
To Next Page
Loading...
