Need help?Do you have a question about the Miele KM 5997 and is the answer not in the manual?
Overview of the Miele hob and its cooking zones.
Details of the control panel, sensor switches, and indicator lamps.
Explanation of symbols and indicators on the displays.
Specifications, ratings, and Miele@home connection for cooking zones.
Defines the intended domestic use and limitations of the appliance.
Essential safety advice for preventing accidents involving children.
Covers electrical safety, installation requirements, and authorized repairs.
Guidance on safe operation, including pacemaker users and fire prevention.
Guidelines for safe disposal and recycling of packaging materials.
Instructions for environmentally responsible disposal of the old appliance.
Steps for cleaning the appliance before its first use.
Information on potential smells or gaps during initial appliance use.
Procedure for automatic and manual calibration of appliance sensors.
Explanation of the induction principle and how cooking zones heat pans.
Describes common noises that may occur during induction cooking.
Guidance on selecting appropriate pans for induction hobs.
Recommendations for efficient energy usage, such as using lids.
Operating sensor switches, turning hob on/off, and selecting cooking power levels.
How to use Auto Heat-up and the Booster function for efficient cooking.
Using the keeping warm function and how to switch off the hob.
How to set the minute minder and automatic switch-off timers.
Recording, using, checking, and deleting custom cooking programmes.
How to use the minute minder, switch-off, and memory functions simultaneously.
How to activate and deactivate the safety and system locks.
Using the Stop and Go feature to pause and resume cooking.
Explains automatic switch-off due to long cooking times or covered sensors.
Details on the overheating protection and its causes.
Lists agents and methods to avoid for safe cleaning.
Instructions for cleaning the ceramic hob surface and removing spills.
How to enter the programming mode and view current settings.
Details of programme options P0-P5 and their status settings.
Details of programme options P6-P16 and their status settings.
Troubleshooting steps for general issues and when the hob does not power on.
Addresses issues like strange smells, no heating, display errors, and fan operation.
Information on connecting the hob to the Miele@home system.
Essential safety guidelines for installing the appliance correctly.
Specifies minimum clearance required above the hob for safety.
Minimum clearances required around the sides and at the back of the hob.
Minimum clearances required between the hob and components below it.
Clearances required when installing near walls with niche cladding.
Technical diagrams showing installation dimensions for KM 5993 model.
Steps for preparing the worktop and installing the hob.
Advice on using sealant and installing on tiled worktops.
Technical diagrams for flush-fitted hob installation dimensions.
Suitability of worktops and base unit requirements for flush fitting.
Steps for installing on granite, marble, wood, or tiled worktops.
Requirements for qualified electricians and safe connection practices.
Importance of continuity, earthing, and manufacturer liability.
Diagrams showing the electrical connections for the appliance.
Information on contacting Miele for faults and quoting appliance details.
To Next Page
General
