Programme* Status** Setting
P00Demonstration mode and
factory default settings
S 0 Demonstration mode on
("dE" appears in the timer display
for a few seconds after switching
on the cooking zone)
S1 Demonstration mode off
S 9 Factory default settings reinstated
P02Power setting range S0 9 power settings
(1, 2, 3 ... to 9)
S 1 17 power settings
(1, 1., 2, 2., 3 ... to 9)
If the Auto heat-up setting is
selected, an A will flash alternately
with the continued cooking setting
in the display.
P03Induction warning tone
when there is no pan or
the pan is unsuitable
S0 Off
S 1 Quiet
S 2 Medium
S 3 Loud
P04Keypad tone when a
sensor is touched
S 0 Off
S 1 Quiet
S2 Medium
S 3 Loud
P05Audible tone for the timer S 0 Off
S 1 Quiet audible tone on for
10 seconds
S2 Medium audible tone on for
10 seconds
S 3 Loud audible tone on for
10 seconds
* Programmes/Status not shown here have no allocation.
** The factory default settings are shown in bold.
Programming
46
To Next Page
