PIN menu
69
12.5.2 Basic cleaning programme
New dishes and new glasses generally have a protective coating, which can be removed by using the basic
cleaning programme. The programme can also be used if coatings such as starch have built up on the
dishes.
Starting the basic cleaning programme
Tap the following buttons in turn:
The button flashes while the
programme is running.
Sequence of the basic cleaning programme:
With an empty, switched off machine: The machine is filled and heated up.
With a machine ready for use: A little water still flows into the boiler.
Once the machine is ready for operation, the text "Add basic detergent. Press start button." appears.
Open the hood and place basic detergent inside the machine. Follow the recommended dosage.
INFO The machine's tank capacity is approx. 35 litres.
Slide the basket with the dishes to be cleaned into the machine.
Close the hood and press the start button.
The start button lights up in blue. The button continues to flash.
The detergent solution is circulated in the interior.
On the display, the time counts down from 300 seconds.
This is followed by a drip pause and the rinse.
Once the time has expired, the button stops flashing and the start button flashes green.
Open the hood and remove the basket from the machine.
As necessary, wash more basekts or press the back button to exit from the menu.
To Next Page
Loading...
