Payment system
Opening the door or cancelling the
programme after it has started may
cause loss of credit (depending on
how the machine was set up*).
* A Miele service technician can re-set
the payment system so that
programming changes can be made
within a specified time period.
Changing a programme once it
has started
You cannot change to another
programme once a programme has
started (this prevents unintentional
alterations). If the programme selector
is altered, the words Programme
cannot be changed appear if the
selector is not turned back to the
original programme.
You will need to cancel the current
programme before you can select a
new one.
Cancelling the current
programme
^
Turn the programme selector to
Finish.
When Finish appears in the display,
this shows that the programme has
been cancelled.
^
Open the door.
^
Close the door.
^
Select a new programme.
^
Press the Start button.
Adding or removing laundry
after a programme has started
,
The laundry, the drum and the
back of the machine all become
very hot during operation. Take care
when in the vicinity of the machine,
when opening the door and
handling freshly dried laundry.
Danger of burning.
^
Press the Door button.
^
Open the door.
^ Add or remove items as required.
^ Close the door.
^ Press the Start button.
Power cuts
– If the dryer is switched off during a
drying programme or there has been
a power cut:
^ When the power is restored and/or
the machine is switched on again,
confirm with OK and start the
programme again.
Time remaining
The time left shown in the display may
now vary from the actual drying time.
Changing the programme sequence
33
To Next Page
Loading...
Need help?
General
