Anti-crease
At the end of the programme the
drum can be set to rotate at intervals
for one or two hours to prevent
laundry creasing, if you do not wish
to remove it immediately.
–
Factory default: Off.
–
1h
–
2h
Buzzer
When the buzzer function has been
activated, an audible tone sounds at
the end of a programme.
– Off
(factory default)
The buzzer will still sound if there is a
fault even if it has been deactivated.
– Normal
The buzzer sounds at the end of a
programme.
–
Loud
The buzzer sounds at maximum
volume at the end of a programme.
Time of day
First select whether you want the
clock displayed as a 24 hour or 12
hour clock, or to not display it at all.
Then set the current time of day.
–
24 h clock or 12 h clock
Once the clock display has been
selected, the time of day can be set.
To set the time of day:
^
Set the hour with the – and + buttons,
and confirm your selection by
pressing the OK button.
^ Now set the minutes and confirm
your selection.
– Time not displayed
If Delay start is activated (see
Settings Delay start), then the timer
will only show the option Start in or
Finish in in hours/minutes.
Display contrast
Display brightness
There are ten different display
contrast and display brightness
settings.
The bars show you the setting.
–
Factory default: level 5
Settings menu
58
To Next Page
Loading...
Need help?
General
